Multi Color Acrylic Art Aerosol Graffiti Spray Paint for Metal /
Plastic / Wall Surface
Desciption:
1. Aristo spray paint is a kind of quick-drying thermoplastic acid.
2. Easy to operate, with good atomization and sufficient spray.
3. The paint coating is quick drying hard, thick and has an
excellent luster adhesion, toughness and shock-resistance.
4. Colors are good for decoration, with protecting function.
5. Widely used for the protecting decoration of the surfaces of
metal, glass and ABS plastics and so on.
Direction:
1. Clean surface thoroughly, removing all dirt, grease, oil, wax,
rust, moisture, etc. Cover adjacent areas to protect from spray
mist. Use at room temp.
2. Shake can vigorously for 1-2 minutes before spraying and
occasionally while in use to ensure color uniformity and prevent
clogging.
3. Hold the can 20-30cm from the surface to be sprayed, press spray
button firmly with steady even strokes while moving can rapidly
back and forth.
4. 2 to 3 films with 20-35μm thick are better. Intermittence of
5-10 minutes between each film is recommended.
5. Sunlight resistant varnish is recommended to improve the weather
resistance of films when used outdoor. Special UV-resistant varnish
can be produced to satisfy special demands of customers.
6. Avoid spraying in rainy day or freezing environment.
7.Dry to handle in 1 hour. Recoat within 1 hour or after 24 hours.
Precaution:
1. Keep in ventilated cool and dry places.
2. Do not clash, puncture, or incinerate the can.
3. Keep out of the reach of children.
4. If eye contact, immediately flush eye with plenty of clean water
and seek medical advice.
5. If skin contact, flush skin with running water (and soap if
available) and seek medical attention in the event of irritation.
